I recently investigated a warning message on Kubernetes that said: DNSConfigForming ... Nameserver limits were exceeded, some nameservers have been omitted. This was technically a Kubernetes event with type: Warning, and these usually indicate that there’s something wrong, so I wanted to investigate it.

This led me down a pretty deep rabbit hole about DNS resolution on Linux in general and Kubernetes in particular. I thought it might be helpful to others to explain how this all works, just in case you have to troubleshoot a DNS issue some day (and as we now, it’s always DNS) on Linux or on Kubernetes.

Kubernetes DNS in theory

Kubernetes provides DNS-based service discovery. When we create a service named foo in namespace bar, Kubernetes creates a DNS entry, foo.bar.svc.cluster.local, that resolves to that service’s ClusterIP.

Any pod in the cluster can resolve foo.bar or foo.bar.svc and obtain that service’s ClusterIP. Any pod in the same bar namespace can even just resolve foo to obtain that ClusterIP.

This means that when we write code that will run on Kubernetes, if we need to connect to a database, we can put db as the database name (instead of hardcoding an IP address) or e.g. db.prod if we want to connect to service db in namespace prod.

This is convenient, because a similar mechanism exists in e.g. Docker Compose; which means that we can write code, test it with Docker Compose, and run it in Kubernetes without changing a single line of code. Cool.

Now, how does that work behind the scenes?

DNS resolution on Linux (level 1: resolv.conf)

At a first glance, DNS resolution on Linux is configured through /etc/resolv.conf. A typical resolv.conf file can look like this:

nameserver 192.168.1.1
nameserver 192.168.1.2
search example.com example.net

This defines two DNS servers (for redundancy purposes; but in many cases you will only have one) as well as a “search list”. This means that if we try to resolve the name hello, here is what will happen:

• first, we look for hello.example.com
• if that name doesn’t exist, we look for hello.example.net
• if that name doesn’t exist, we look for hello
• if that name doesn’t exist, we report an error (like Name or service not known)

By default, only the first name server is used. The other name servers are queried only if the first one times out. This means that all name servers must serve exactly the same records. You cannot have, for instance, one name server for internal domains, and another one for external domains! If you send a query to the first server, and that server replies with “not found” (technically, an NXDOMAIN reply), the second server will not be queried - the “not found” error will be reported right away.

(Note: it is possible to use the option rotate, in which case name servers are queried in round-robin order to spread the query load. Name servers still need to have the same records, though; otherwise DNS replies might be inconsistent and that will cause some very weird errors down the line.)

There are some limits and “fine print”:

• we can specify up to 3 name servers (additional name servers will be ignored);
• we can specify up to 6 search domains;
• the ndots option can be used to change whether (and when) to try the search list first, or an “initial absolute query” (i.e. hello without the search domain).

You can see extra details in the resolv.conf(5) man page, which explains for instance how to change timeout values, number of retries, and that kind of stuff.

DNS resolution on Linux (level 2: nsswitch.conf)

Perhaps you’ve come across .local names. For instance, on my LAN at home, I can ping the machine named zagreb with ping zagreb.local:

$ ping -4 zagreb.local
PING zagreb.local (10.0.0.30) 56(84) bytes of data.
64 bytes from 10.0.0.30: icmp_seq=1 ttl=64 time=2.16 ms
...

This is sometimes called Zeroconf, or Bonjour, or Avahi, or mDNS. Without diving into these respective protocols and implementations, how does that fit in the system that we explained above?

This is because in reality, before using /etc/resolv.conf, the system will check /etc/nsswitch.conf. NSS is the “name service switch”, and is used to configure many different name lookup services, including:

• hosts (mapping names to IP addresses)
• passwd (mapping user names to their UID and vice versa)
• services (mapping service names like http, ftp, ssh to port numbers and vice versa)

In that file, there might be a line looking like the following one:

hosts: files mymachines myhostname mdns_minimal [NOTFOUND=return] dns

There would be a lot to unpack there. I won’t dive into all the little details because this is not relevant to Kubernetes, but this essentially means that when trying to resolve a host name, the system will look into:

• files, which means /etc/hosts (that’s why we can hard-code some name and IP addresses in that file!);
• mymachines, which is something used for systemd-machined containers;
• myhostname, which automatically maps names like localhost to 127.0.0.1, or our local host name to a local IP address;
• mdns_minimal, which resolves .local names;
• dns, which is the traditional DNS resolver configured by resolv.conf as explained above.

You might also come across resolve, which uses systemd-resolved for name resolution. That’s a totally different system with its own configuration and settings, and it’s mostly irrelevant to Kubernetes, so we won’t talk about it here.

DNS resolution on Linux (level 3: musl and systemd-resolved)

Everything we explained in the two previous sections only applies to programs using the GNU libc, or “glibc”. This is the system library used on almost every Linux distribution, with the notable exception of Alpine Linux, which uses musl instead of glibc.

The musl name resolver is much simpler: there is no NSS (name service switch), and DNS resolution is configured exclusively through /etc/resolv.conf. It also behaves a bit differently (it sends queries to all servers in parallel instead of one at a time). You can see more details in this page, which explains differences between musl and glibc.

This is relevant because Alpine is used in many container images, especially when optimizing container image size. Some images based on Alpine can be 10x smaller than their non-Alpine counterparts. Of course, the exact gains will depend a lot on the program, its dependencies, etc, but this explains why Alpine is quite common in the container ecosystem.

Additionally, if your system uses systemd-resolved (an optional component of systemd), the DNS configuration will look quite different.

When using systemd-resolved:

• the systemd-resolved.service unit will be running;
• in /etc/nsswitch.conf, on the hosts: line, the module resolve will be mentioned, indicating that host name resolution will use systemd-resolved over DBUS instead of “traditional” DNS queries over UDP or TCP;
• /etc/resolv.conf will be a symlink to /run/systemd/resolve/stub-resolv.conf and contain the line nameserver 127.0.0.53;
• systemd-resolved will expose a legacy resolver on 127.0.0.53, for applications that wouldn’t use the name service switch (for instance, applications linked with Alpine, or using Go native network libraries);
• DNS configuration will be done through systemd configuration files and/or with the resolvectl tool instead of editing /etc/resolv.conf;
• /run/systemd/resolve/resolv.conf will contain a compatibility configuration file listing the uplink DNS servers, to be used by applications requiring a “classic” resolv.conf file.

That last item is relevant to Kubernetes, as we will see later, because kubelet will sometimes need that resolv.conf file.

DNS resolution on Kubernetes (level 1: kube-dns)

Equipped with all that DNS configuration knowledge, let’s have a look at the /etc/resolv.conf file in a Kubernetes pod. That particular pod is in the default namespace, and its resolv.conf file will look like this:

search default.svc.cluster.local svc.cluster.local cluster.local
nameserver 10.10.0.10
options ndots:5

The nameserver line indicates to use the Kubernetes internal DNS server. The IP address here corresponds to the ClusterIP address of the kube-dns service in the kube-system namespace:

$ kubectl get service -n kube-system kube-dns
NAME       TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)                  AGE
kube-dns   ClusterIP   10.10.0.10   <none>        53/UDP,53/TCP,9153/TCP   9d

The exact IP address might be different in your cluster. It is often the 10th host address in the cluster IP service subnet, but that’s not a hard rule.

That kube-dns service will typically be configured together with a coredns deployment; and that coredns deployment will be configured to serve Kubernetes DNS records (like the foo.bar.svc.cluster.local mentioned earlier) and to pass queries for external names to an upstream server.

Note: it’s also possible to use something other than CoreDNS. In fact, early versions of Kubernetes (up to 1.10) used a custom server called kube-dns, and that’s why the service still has that name. And some folks replace CoreDNS, or add a host-local cache, to improve performance and work around some issues in high-traffic scenarios. You can check this KubeCon presentation for an example. (Even if it’s a few years old, that presentation still does a great job at explaining DNS mechanisms, and the ideas and techniques that it explains are still highly releveant today!)

Now, let’s look at the search line. It basically means that when we try to resolve foo, we’ll try, in this order:

• foo.default.svc.cluster.local, which corresponds to “the foo service in the same namespace as the pod”;
• foo.svc.cluster.local, which doesn’t correspond to anything in that case, but would be useful if we were trying to resolve foo.bar, because it would then correspond to “the foo service in the bar namespace”;
• foo.cluster.local, which again doesn’t correspond to anything in that case, but would be useful if we were trying to resolve foo.bar.svc;
• foo on its own, which also doesn’t resolve to anything.

This means that in our code, we can connect to, e.g.:

• foo, which will resolve to the foo service in the current namespace,
• foo.bar, which will resolve to the foo service in the bar namespace,
• foo.bar.svc, which will resolve to the same,
• foo.bar.svc.cluster.local, which also resolves to the same,
• foo.example.com, which will resolve with external DNS.

Phew! Well, of course, there are some little details to be aware of.

DNS resolution on Kubernetes (level 2: customization)

Let’s start with the easier things: the cluster.local suffix can be changed. It’s typically configured when setting up the cluster, similarly to e.g. the Cluster IP subnet. It requires updating the kubelet configuration, as well as the CoreDNS configuration. Changing that suffix is rarely necessary, except if we want to connect multiple clusters together, and enable one cluster to resolve names of services running on another cluster. It’s fairly unusual, except when running huge applications - huge in the sense that they won’t fit on a single cluster; or we don’t want to fit them on a single cluster for various reasons.

Then, what about the svc component? It’s here because there is also pod, in other words, pod.cluster.local. The Kubernetes DNS resolves A-B-C-D.N.pod.cluster.local to A.B.C.D, as long as A.B.C.D is a valid IP address and N is an existing namespace. Let’s be honest: I don’t know how this serves any purpose, but if you do, please let me know!

Finally, there is that options ndots:5. This indicates “how many dots should there be in a name for that name to be considered an external name”. In other words, if we try to resolve a, a.b, a.b.c, a.b.c.d, or a.b.c.d.e, the search list will be used - so resolving api.example.com will result in 5 DNS queries (for the 4 elements of the search list + the upstream query). But if we try to resolve a.b.c.d.e.f, since there are at least 5 dots, it will directly try an upstream query. (The default value for ndots is 1.)

This prompts a question: if we want to resolve api.example.com, how can we avoid the extraneous DNS queries? And another: if we want to resolve the external name purple.dev while also having a service named purple in namespace dev, what should we do? The answer to both questions is to add a dot at the end of the domain. Resolving purple.dev. will skip the search list, which means it won’t incur extraneous DNS queries, and it will resolve the external name and never an internal Kubernetes name.

Is that all we need to know about Kubernetes DNS? Not quite.

DNS resolution on Kubernetes (level 3: dnsPolicy)

“Normal” pods will have a DNS configuration like the one shown previously - reproduced here for convenience:

search default.svc.cluster.local svc.cluster.local cluster.local
nameserver 10.10.0.10
options ndots:5

But this can be changed by setting the dnsPolicy field in pod manifests.

It’s possible to tell Kubernetes to use the DNS configuration of the host. This is used, for instance, in the CoreDNS pods, since they need to know which resolvers to query for external names. It’s also used by some infrastructure, essential pods, that need to resolve external names but don’t want to depend on the Kubernetes internal DNS to be available to function. (I’ve seen this with some CNI or CSI pods that need to connect to cloud providers’ API endpoints.)

It’s also possible to tell Kubernetes to use a completely arbitrary DNS configuration for a pod, specifying the DNS servers and search lists.

You can find all the details about that dnsPolicy field and its possible values in this Kubernetes documentation page.

When using the DNS configuration of the host, Kubernetes (technically, kubelet) will use /etc/resolv.conf on the host - or, if it detects that the host is using systemd-resolved, it will use /run/systemd/resolve/resolv.conf instead. There is also a kubelet option, --resolv-conf, to instruct it to use a different file.

Back to Nameserver limits were exceeded

Let’s come back to our error message.

When we tell Kubernetes to use the host’s DNS configuration (either through an explicit dnsPolicy: Default, or an implicit one because the pod has hostNetwork: true, which is the case for kube-proxy and many CNI pods), it will obtain that configuration from /etc/resolv.conf on the host. We mentioned above that the DNS resolvers (both in glibc and musl) supported up to 3 name servers; extra name servers are ignored. If there are more than 3 resolvers configured in that file, Kubernetes will issue that warning, because it “knows” that the extra servers won’t be used.

In legacy IPv4 environments, it’s fairly rare to have more than 2 servers listed. However, in dual stack IPv4/IPv6 environments, it is quite possible to end up with more.

For instance, this server on Hetzner has two IPv4 servers and two IPv6 servers:

nameserver 2a01:4ff:ff00::add:1
nameserver 2a01:4ff:ff00::add:2
nameserver 185.12.64.1
nameserver 185.12.64.2

This machine has an IPv4 server, and one IPv6 server per interface, and has 3 interfaces:

nameserver 10.0.0.1
nameserver fe80::1%eno2
nameserver fe80::1%wlo1
nameserver fe80::1%enp0s20f0u3u4

In that case, kubelet will issue a warning - the DNSConfigForming that we mentioned at the beginning of this article - when creating the pod.

The warning is totally harmless (it doesn’t indicate a configuration issue or potential problem with our pod), and the DNS behavior of our pod will not change at all. Remember: with the glibc resolver, we try each resolver in order anyway. It’s great to have a second one as a backup, but 3 or 4 is often a bit excessive.

Still, how can we get rid of that warning?

That’s where things can get a bit complicated.

If you have configured your DNS resolution manually (by editing /etc/resolv.conf), all you have to do is trim the list of name servers to have only 3 or less.

But it’s likely that this configuration was provided automatically, generally by a DHCP client (on your LAN if this is your local machine, or by your hosting provider if this is a server somewhere). If you can update the configuration of the DHCP server so that it provides 3 name servers or less, great! If you can’t, you will have to trim that list client-side.

It would be tempting to manually edit /etc/resolv.conf (or, when using systemd-resolved, /run/systemd/resolve/resolv.conf), but it will probably not be durable. First, it’s almost guaranteed that this file will be regenerated when the machine is rebooted. Next, it’s also very likely that this file will be regenerated at some point, either by the DHCP client or by systemd-resolved.

One possibility would be to trim the list of DNS servers received by the DHCP client. The exact method will depend on the DHCP client. On Ubuntu, the default DHCP client is dhclient, and DNS is configured with dhclient-script, which itself has a system of hooks. For instance, on a system using systemd-resolved, there is a script in /etc/dhcp/dhclient-exit-hooks.d/resolved to feed the DNS resolvers to systemd-resolved. The DNS resolvers are passed through the environment variable $new_domain_name_servers. It should be possible to drop a script in that directory, for instance reduce-nameservers, to change that variable. (Since reduce-nameservers is before resolved, it should be called before; but the dhclient-script documentation doesn’t specify in which order the scripts get called.)

Unfortunately, in some scenarios, this will be even more complicated, because some name servers will be passed at boot time (and collected by systems like cloud-init, netplan…) and more name servers will be added by the DHCP client at a later point. This can also happen on system with multiple network interfaces, for instance connected to multiple virtual networks. These systems might receive a couple of DNS servers on each interface, and it looks like systemd-resolved will just happily aggregate all of them, causing kubelet to show us that warning.

Another approach (if it’s feasible for you to control your kubelet configuration) is to point kubelet to a custom resolv.conf file, and generate that file from the existing resolv.conf file, keeping only the first 3 name servers.

And of course, while these methods are relatively simple (especially when running on-prem, with a fixed set of nodes), they immediately require a lot of extra work when you want to bundle them into your node deployment process - for instance, when using managed nodes, and/or cluster autoscaling.

Conclusions

Bad news: there isn’t a fool-proof way to get rid of that DNSConfigForming warning.

Good news: it’s totally harmless.

While this post didn’t give us a way to easily and reliably get rid of that error message, we hope that it gave you lots of insightful details about how DNS works - on Kubernetes, but on modern Linux systems in general as well!